Polaris DP-20 User Manual page 21

5. Use the ARROW keys to scroll to the desired
6. Use the ARROW keys to scroll to the desired
7. Use the ARROW keys to scroll to the desired
8. Use the ARROW keys to scroll to the desired
9. Use the ARROW keys to scroll to the desired
10. Use the ARROW keys to scroll to the desired
11. If desired, use the ARROW keys to scroll until
12. Otherwise, press the MANUAL key to exit the
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
Measurement menu. Next in the list is the
Servo-Center Sensor. The sensor signal is
displayed on Line 4.
Measurement menu. Next in the list is the
TACHOMETER. The tachometer signal is
displayed on Line 4.
Measurement menu. Next in the list is the
MOTOR TYPE. The motor type is displayed on
Line 4.
Measurement menu. Next in the list is the
DIGITAL INPUTS. The status of the inputs is
displayed on Line 4. The order in which the
inputs are displayed is 5,4,3,2,1,0.
Measurement menu. Next in the list is the
FIRMWARE VERSION. The version number of
the firmware is displayed on Line 4.
Measurement menu. Next in the list is the
SERIAL NUMBER. The serial number of the
DP-20 is displayed on Line 4.
EXIT MENUS is displayed no line 3. Pressing
the ENTER key while this screen is displayed
will exit the Measurement Menus and return to
the Operator Level.
Measurement Menus
Operator Level.
DP-20 WEB GUIDE CONTROLLER
and return to the
5
5-3
×Ø 2C.3.3
MEASUREMENT
~ƒ SENSOR (X2)
-ããããÜÜÜÜ+ 50%
×Ø 2C.3.4
MEASUREMENT
TACHOMETER
-ããããÜÜÜÜ+ 0%
×Ø 2C.3.5
MEASUREMENT
MOTOR TYPE
1.3A MOTOR 14K
×Ø 2C.3.6
MEASUREMENT
DIGITAL INPUTS
000000
×Ø 2C.3.7
MEASUREMENT
FIRMWARE VERSION
DP-20 Ver 1.00
×Ø 2C.3.8
MEASUREMENT
SERIAL NUMBER
SN:10000
×Ø 2C.3.9
MEASUREMENT
EXIT MENUS
×Ø 2C
SERVO-CENTER
~ƒ -ãããããÜÜÜÜÜ+
Figure Sheet 1-862-D