Polaris DP-20 User Manual page 11

1A
AUTOMATIC
× -ãããããÜÜÜÜÜ+
× 3A.2.2
SETUP (MAN)
GUIDE POINT
-ÜÜÜÜåÜÜ+ +20.0%
1C
AUTOMATIC
×Ø -ãããããÜÜÜÜÜ+
× 2A
SERVO CENTER
~ƒ -ãããããÜÜÜÜÜ+
× 3A.1
SETUP (MAN)
GUIDE POINT
-ÜÜÜÜåÜÜ+ +20.0%
1A
AUTOMATIC
× -ãããããáÜÜÜÜ+
GP: +4.0%
1A
AUTOMATIC
× -ãããããáÜÜÜÜ+
ASC
1A
AUTOMATIC
× -ãããããáÜÜÜÜ+
ASC ACTIVE
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
LINE 2 While at the Operator Level, this line contains the name of
the currently selected Operation mode.
LINE 2 While in the setup menus, this line indicates that a Setup
Menu has been selected and also indicates the current Operation
Mode.
LINE 3 While at the Operator Level, in either Automatic or Manual
mode, this line contains the symbol for the current sensor mode and
also a bargraph indicating the signal level of the currently selected
sensor mode. The sensor symbols are:
indicates Edge Right (X4 port);
Ø
edge sensors, X4 & X5 ports);
port); and indicates Edge of Line guiding (X4 port).
Ł
LINE 3 While at the Operator Level, in Servo-Center mode, this line
contains the Servo-Center sensor symbol (
indicating the signal level of the Servo-Center sensor.
LINE 3 While in the Setup Menus, this line indicates the title of the
current menu selection.
LINE 4 While at the Operator Level, this line displays the Guide Point
value, if the value is not zero.
LINE 4 While at the Operator Level, in Automatic or Servo Center
mode, if ASC Control is set to ON, ASC is displayed on this line.
LINE 4 While at the Operator Level, in Automatic mode or Manual
mode, if ASC Control is set to ON, and if either one of the programmed
ASC Limits is reached, this line flashes ASC ACTIVE.
DP-20 WEB GUIDE CONTROLLER
indicates Edge Left (X5 port);
×
indicates Center Guiding (both
×Ø
indicates Center of Line guiding (X4
ý
) and also a bargraph
~ƒ
2
2-3
Figure Sheet 1-862-D