Exposure Compensation; Movie Frame Stabiliser - Samsung L200 User Manual

Setting up the recording function using the camera buttons

Exposure compensation

This camera automatically adjusts the exposure according to the ambient
lighting conditions.
However, you can adjust exposure value by using [EV] menu.
Compensating Exposure
1. Press the Fn button, and then use the UP
and DOWN buttons to select the exposure
compensation icon ( ).
The exposure compensation menu bar will
appear as shown.
2. Use the LEFT and RIGHT buttons to set
the desired exposure compensation factor.
3. Press the Fn button again. The value you set will be saved and the
Exposure Compensation setup mode will close.
If you change the exposure value, the exposure indicator (
displayed on the bottom of the LCD monitor.
A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the
exposure and the LCD monitor will appear white or you may not get
good pictures.

Movie frame stabiliser

This function helps stabilize images captured during movie recording.
You can select this menu only in the MOVIE mode.
[Off] ( ) : Movie frame stabilizer function is
disabled.
[On] ( ) : This function helps stabilize
images captured during movie
recording.
EV
) will be
STABILIZER
Off
43