Starting The Recording Mode - Samsung digimax U-CA 501 User Manual

LCD monitor indicator
15 Sharpness
16 Image quality
17 Image size
Number of available shots remaining
18
Remaining time ( Movie clip/ Voice recording)
19 Digital zoom rate
20 Digital zoom bar
21 Voice memo

Starting the recording mode

If the memory card is inserted in the camera, all the camera functions apply only to the
memory card.
If the memory card is not inserted in the camera, all the camera functions apply only to the
internal memory.
Recording a Movie clip
1. Insert the batteries (p.14). Insert the batteries taking note
of the polarity (+ / -).
2. Insert the memory card. (p.17) As this camera has a
16MB internal memory, you do not need to insert the
memory card. If the memory card is not inserted, an image
will be stored in the internal memory. To expand memory
capacity, insert a memory card. If the memory card is
inserted, an image will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
5. Select the MOVIE CLIP(
mode switch.
6. Point the camera towards the subject and compose the
image by using the LCD monitor.
7. Press the shutter button to take a movie clip.
Press the shutter button once and movie clips are recorded for as long as the available
recording time allows. Movie clips will still be recorded if the shutter button is released. If
you wish to stop recording, press the shutter button again.
Image size and type are listed below.
- Image size : 640X480, 320X240 (Selectable)
- File type : *. avi(MJPEG)
2560, 2048, 1600, 1024, 640
00:01:25 / 00:24:52
) mode by sliding the
18
X5.0
[ MOVIE CLIP mode ]
p.42
p.38
p.37
p.19~21
p.23
p.24
19