Starting Pc Mode - Samsung DIGIMAX 301 User Manual

Starting PC Mode

If you insert the USB cable into the USB connection terminal, the camera working mode will
change to the PC mode automatically.
In this mode, you can download stored images to your PC through the USB cable.
The LCD monitor is always turned off in PC mode.
The camera status lamp will light up when the files are transferring via the USB connection.
Connecting the camera to PC
1. Turn the PC power on.
2. Turn the camera power on.
3. Connect the PC and the camera via
the USB cable.
- Connect the small end of the USB
cable to the USB port on the camera.
- Connect the large end of the USB
cable to the USB port on the
computer.
- Make sure the connectors are fully
seated.
Disconnecting the camera and PC
Refer to the following page.
- WIN 98SE
- WIN 2000/ ME/ XP
INFORMATION
The camera driver must be installed before using PC mode. For driver installation
instructions, please refer to p.76.
To save battery power, it is recommended that you use an AC adapter (Optional)
when connecting the camera to a computer.
82
: p.87
: p.87~88