Table of Contents

Advertisement

Self-timer(

Selecting the self-timer
1.Rotate the MODE DIAL to select a recording mode other
than Voice Recording mode.
2. Press the SELF-TIMER button until the desired mode
indicator displays on the LCD monitor.
A 10 second, 2 second or Double self-timer icon
appears on the LCD monitor. In Movie Clip mode, only
the 10-second self-timer will work.
10SEC self-timer(
Pressing the shutter button will allow an interval of
10 seconds before the image is taken.
2SEC self-timer(
Pressing the shutter button will allow an interval of
2 seconds before the image is taken.
Double self-timer (
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken. When
using the flash, the 2-second self-timer may be delayed
for longer than 2 seconds depending on the flash charge time.
3. When you press the SHUTTER button, the picture will be taken after the specified time
has elapsed.
INFORMATION
The default is OFF.
When taking a picture using the self-timer, the self-timer lamp works as follows:
10 second self-timer setting : The self-timer lamp blinks at 1 second intervals for the
2 second self-timer setting : The self-timer lamp blinks at 0.5 second intervals for 2
If you operate the Power button, Mode dial and Self-timer button during the self-timer
operation, the self-timer function is cancelled.
Use a tripod to prevent the camera from shaking.
) / Right button
) :
) :
) :
first 7 seconds. It blinks at 0.5 second intervals for the
remaining 3 seconds.
seconds.
[ Selecting the 10SEC self-timer ]
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digimax 301

Table of Contents