Table of Contents

Advertisement

+/- button

You can use the +/- button to adjust the values for the exposure compensation.
Exposure compensation : This camera automatically adjusts the exposure according to the
ambient lighting conditions. You can also select the exposure value by using the +/- button. In
Still image, MySET and Photo Frame mode, the exposure compensation can be adjusted
between -2.0EV and +2.0EV (at 0.5EV increment), and in Night Scene mode, you can set the
Longtime shutter.
Compensating Exposure
1. When you press the +/- button, the exposure
compensation menu bar and the exposure
compensation icon (
2. Use the LEFT and RIGHT buttons to set the desired
exposure compensation factor ( Ev).
3. Press the +/- button again. The value you set will be
saved and the Exposure Compensation setup mode will
close. If you change the exposure value, the exposure
indicator (
) will be displayed on the bottom of the
LCD monitor.
Setting the Long-time Shutter (Night Scene mode)
1. Turn the Mode Dial to select Night Scene mode.
2. Press the +/- button. Available shutter speeds will be
displayed as shown in the picture.
3. Use the LEFT and RIGHT buttons to select the desired
shutter speed.
4. Press the +/- button. The menu will disappear and the
long-time shutter speed will be set. Then the long-time
shutter icon ( LT ) will be displayed at the bottom right of
the LCD monitor.
INFORMATION
A negative exposure compensation value reduces the exposure. Note that a positive
exposure compensation value increases the exposure and the LCD monitor will
appear white or you may not get good pictures.
30
) will appear as shown.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digimax 301

Table of Contents