Start Up Sound; Start Up Image - Samsung DIGIMAX 301 User Manual

Start up sound

You can set the startup sound at power-on.
Setting the Startup Sound
1. In any mode other than Voice Recording mode, press
the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.BEEP] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- If [OFF] is selected
- If [ON] is selected
5. Press the menu button twice and the menu will disappear.

Start up image

You can select the image that is first displayed on the LCD monitor whenever the camera is
turned on.
Setting a Startup Image
1. In any mode other than Voice Recording mode, press
the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.IMAGE] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- If [OFF] is selected
- If [IMAGE1] is selected : The Samsung brand logo
- If [IMAGE 2] is selected : The startup image you
5. Press the menu button twice and the menu will
disappear.
66
: The startup sound will not be heard.
: The startup sound will be heard.
: The startup image will not
be displayed.
will be displayed.
created in [RESIZE] will be
displayed.
MYCAM
ON
S. BEEP
S. IMAGE OFF
BACK: SET:OK
MYCAM
S. BEEP OFF
S. IMAGE IMAGE1
IMAGE2
BACK: SET:OK