O U R
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a laserdisc player.
Because there are two sets of input jacks, you can connect two different A/V components
(i.e., a VCR and a laserdisc, 2 VCRs, etc.)
For more information on connecting equipment, see pages 2.1 – 2.8.
Œ VIDEO INPUT jack
Video signals from VCRs, DVD
players and similar devices.
´ AUDIO INPUTS
DVD AUDIO INPUTS
Audio signals from VCRs, DVD players and similar
Use these jacks to connect the audio signals
from a DVD player when using the DVD video
input jacks. When not using the DVD jacks, these
audio jacks function as audio for Video 2 or S-
ˇ AUDIO-VIDEO MONITOR
These audio-video signals are identical to A/V
signals being displayed on the big screen.
(Typically used as the input signals for a record-
(INPUT1 and 2)
¨ SUPER VIDEO INPUT jack
(For models TXL2791F/
S-Video signal from an S-VHS VCR or DVD player.
ˆ DVD VIDEO INPUT jacks
Connect video from a DVD player.
Note: Only black and white signals are output
from a monitor in DVD mode.
Connect to an antenna or to a cable TV system.