Remote Control - Samsung TX-T2085 Owner's Instructions Manual

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV. When using the remote control, always point it
directly at the TV.
➢
 This is a special remote control for the visually impaired, and has Braille points on the POWER, Channel, and Volume buttons.
 The performance of the remote control may be affected by bright light.
1 POWER
Turns the TV on and off.
2 NUMERIC BUTTONS
Press to directly select a channel.
3 –
Press to select additional channels
being broadcast by the same station.
For example, to select channel "54-
3", press "54", then press "–" and "3".
4 VOL +, VOL –
Press to increase or decrease the
volume.
5 MENU
Displays the main on-screen menu.
6 UP▲/DOWN▼/LEFT◄/RIGHT►/
ENTER
Use to select on-screen menu items
and change menu values.
7 S.MODE
Press to select the sound mode.
8 P.MODE
Press to select the picture mode.
9 AUTO PROG.
Press to automatically store selected
Air/Cable channels.
0 ADD/DEL
Use to store and delete channels
to/from memory.
! PRE-CH
Tunes to the previous channel.
Installing Batteries in the Remote Control
1 Lift the cover at the back of the remote control upward as shown in the figure.
2 Install two AAA size batteries.
➢
 Make sure to match the + and – ends of the batteries with the diagram inside the
compartment.
 Do not mix battery types, i.e. alkaline and manganese.
3 Replace the cover.
➢
Remove the batteries and store them in a cool and dry place if you won't be using the
remote control for a long time. The remote control can be used up to about 23 feet from
the TV. (Assuming typical TV usage, the batteries last for about one year.)
@ SOURCE
Press to display all of the available
video sources.
# INFO
Press to display information on the
TV screen.
$ TV/DTV
Press to switch between TV (Analog)
and DTV (Digital) mode.
% CH , CH
Press to change channels.
^ EXIT
Press to exit from the menu.
& MUTE
Press to temporarily cut off the sound.
* P.SIZE
Press to change the screen size.
( SLEEP
Press to select a preset time interval
for automatic shut off.
) MTS
Press to choose stereo, mono
or Separate Audio Program(SAP
broadcast).
a CAPTION
Controls the caption decoder.
b R.SURF
Press to automatically return to a
preferred channel after a user-preset
time delay.
c TURBO
Press to select Turbo sound.
English - 5