To Select The Source; To Edit The Input Source Name; Picture Control; Using Automatic Picture Settings - Samsung TX-T2085 Owner's Instructions Manual

To Select the Source

Use to select TV or other external input sources such as DVD players, VCRs, etc. connected
to the TV.
1 Press the MENU button to display the menu.
Press the ENTER button to select Input.
2 Press the ENTER button to select Source List.
Press the ▲ or ▼ button to select signal source, then press the ENTER button.
➢
You can choose between the following sets of jacks: TV, AV, or Component on the
TV's rear panel and AV on the TV's side panel.
Press the SOURCE button on the remote control to view an external signal source.
 In TV(Analog) mode: TV → AV → Component
 In DTV(Digital) mode: DTV → AV→ Component
➢
To check the input signals displayed, press the INFO button on the remote control.

To Edit the Input Source Name

Name the external device connected to the input jacks to make your input source selection
easier.
1 Press the MENU button to display the menu.
Press the ENTER button to select Input. Press the ▲ or ▼ button to select Edit Name, then
press the ENTER button.
2 Press the ▲ or ▼ button to select AV or Component input jack, then press the ENTER
button.
3 Press the ▲ or ▼ button to select VCR, DVD, Cable STB, Sat. STB, AV Recv., DVD Recv.,
Game, Camcorder, or DVD Combo input source, then press the ENTER button.
Press the EXIT button to exit.

Picture Control

Using Automatic Picture Settings

Your TV has four automatic picture settings ("Dynamic", "Standard", "Movie", "Custom")
that are preset at the factory.
You can activate a Picture Setting by making a selection from the menu.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the ENTER button.
2 Press the ENTER button to select Mode.
Press the ENTER button again. Press the ▲ or ▼ button to select the Dynamic, Standard,
Movie, or Custom picture setting, then press the ENTER button.
 Choose Dynamic for viewing the TV during the day or when there is bright light in the
room.
 Choose Standard for general TV watching mode.
 Choose Movie when watching movies.
 Choose Custom if you want to adjust the settings according to personal preference.
Press the P.MODE button on the remote control to select one of the standard picture
settings.
English - 11
Source List
TV
DTV
AV - - - -
Component - - - -
Move Enter Return
Edit Name
AV : - - - - ----
VCR
Component : - - - -
DVD
Cable STB
Sat. STB
AV Recv.
DVD Recv.
Game
Camcorder
DVD Combo
Move Enter Return
Mode
Mode : Dynamic
Dynamic
Contrast : 100
Standard
Brightness : 50
Movie
Sharpness : 75
Custom
Color : 50
Tint : G 50 R 50
Color Tone : Cool1
Reset
Move Enter Return
Continued...