Advertisement
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
STEP 13:
Place supplied template on rear fascia as shown and trace where cut will be (See Fig. 10).
NOTE:
Tape off area to be cut to protect the painted surfaces.
STEP 14:
Cut fascia along traced lines and drill holes with a 3/16" drill bit.
STEP 15:
Install fascia outlets with supplied hardware (See Fig. 11).
STEP 16:
Install mufflers. Place the band clamp on the inlet to the muffler.
STEP 17:
Install underbody pipes. Place band clamps on the inlet of the underbody pipes. Insert into mufflers.
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
Techline 1-800-367-3788
M-5230-V6
Mustang V6 Dual Exhaust Kit
INSTALLATION INSTRUCTIONS
FORD RACING PERFORMANCE PARTS.
Page 4 of 5
Fig. 10
Fig. 11
IS-1850-0277
Advertisement
