Ford M-5230-V6 Installation Instructions

NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
Please visit www.fordracingparts.com for the most current instruction information
! ! ! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION.
AT ANY TIME YOU DO NOT UNDERSTAND THE INSTRUCTIONS, PLEASE CALL THE FORD RACING
OVERVIEW:
The use of a floor hoist is recommended for this installation. If you do not have access to one, use a hydraulic floor
jack and jack stands to raise the vehicle.
! ! ! CAUTION: JACK STANDS MUST BE USED ON A LEVEL SURFACE AND BE SECURELY SEATED.
FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY OR VEHICLE DAMAGE ! ! !
KIT INCLUDES:
Item # Qty
1
2
3
4
5
6
7
8
NOTE: Please check kit contents before starting work on the vehicle.
INSTALLATION INSTRUCTIONS:
! ! ! CAUTION: PERFORM THE FOLLOWING WORK ON A COLD VEHICLE ONLY ! ! !
STEP 1: Remove negative cable from battery.
STEP 2: Raise vehicle and apply parking brake.
STEP 3: Loosen clamp at the rear of the Y-pipe assembly and on the muffler (use penetrating oil if
necessary).
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
Techline 1-800-367-3788
M-5230-V6
Mustang V6 Dual Exhaust Kit
INSTALLATION INSTRUCTIONS
FORD RACING PERFORMANCE PARTS.
TECHLINE AT 1-800-367-3788 ! ! !
Description
1 M-5230-GTA Muffler Kit
1 RH Intermediate Pipe
1 LH Intermediate Pipe
4 X-Pipe Clamps
2 LH Brackets
2 Rear Fascia Trim and Fastening Hardware
1 V6 X-Pipe
2 Brackets Bolts
Page 1 of 5 IS-1850-0277