Advertisement
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
STEP 8:
Cut the Y-pipe and de-burr the inside and outside of the pipe (See Fig. 7 & 8).
STEP 9:
Remove the right hand Y-pipe tube and loosen the left hand (be sure to unplug sensor on right hand side
before removing).
STEP 10:
Use penetrating oil to lubricate the end of the Y-pipe tubes. Slide the X-pipe over the left hand Y-pipe
tube and then insert the right hand tube into the X-pipe and reattach it to the exhaust manifold installing
nuts hand tight. Re-connect the sensor connector (See Fig. 9).
STEP 11:
Tighten pipe to manifold nuts.
STEP 12:
Install left hand muffler hangers. Tap bosses using M8 X 1.25 tap and then install hanger with M8 bolts.
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
Techline 1-800-367-3788
M-5230-V6
Mustang V6 Dual Exhaust Kit
INSTALLATION INSTRUCTIONS
FORD RACING PERFORMANCE PARTS.
Fig. 7
Page 3 of 5
Fig. 8
Fig. 9
IS-1850-0277
Advertisement
