OPCOM Farm GrowWall2 Quick Manual Manual page 2

D. Sprouts and Microgreens.
1. Before you start next seedling, take advantage of the seedling tray for sprouts and microgreens it takes 7-10 days to harvest.
2. Put seeds in warm water(recommeded temperature is 35
3. Cover the sponges with wet paper towels.
4. Place the seedling tray with cover in the shade or cover it with black cloth.
5. After germination, during the growing stage, keep green sprout under the light and white sprout in the shade or cover it
with black cloth; Around 7-10 days, you can harvest.
Day 0
E. Optional Accessories
1. OPCOM Link Box 3. Pod Stick : 3x30PK
2. OPCOM Wave Clip 4. Black Cloth Cover
F. Maintenance
F1. Add Water
1. Measure the pH/EC value every 1-2 weeks and add water to maintain the vlaue balance
F2. Change Water
1. After a cycle of planting, change the water and clean the unit
2 When change water, clean water gateway on each planting layers, you may also add moss detergent in the water tank to avoid the moss remaining
3. On the regular basis of every 1-2 weeks, clean the filtering sponge in the pump
F3. EC / pH Meter Use and Calibration
1. Keep the electrode clean of EC/pH meter and cover the electrode protective cap when not in use.
2. Turn off the meter when not in use for an extended amount of time.
G. Troubleshooting
Issue Checkpoints / Solution
Make sure all power cables are connected.
Lamps not Power button is ON.
Make sure LED status is ON
lighting up
If it is on HI or LOW mode, the lamp has off time, during 24-hour cycle.
Pump may make a buzzing sound in the beginning due to air inside the pump. After a minute with
Pump has a
buzzing sound water running through the pump, this sould be reduced.
The lamp/ pump Control Box is designed with Auto, HI and LOW modes, which turn the lamps and the pump on and off
stop after hours periodically. It simulates an outdoor daily cycle to offer the best growing condition
Rotate the ring at the end of the pump clockwise or counterclockwise to get the most suitable water flow
Make sure it is not clogged at the water flowing gateway on each planting layer
Water Over flows
H. Q&A
Answer
Question
Product leakage When it works. During the abnormal delivery in vessels, aircraft, or other vehicles, it may lead to damages in GrowWall
(OFG003)/GrowWall2(OFG003-2) and creates leaking problem. OPCOM FARM provides waterproof tape
for you fix it in case damage happened.
How to use planting partition? You can move the partition to change the size of the pot for your planting.
F1708038 P17092804
F1709051
For more information, please visit
www.opcomfarm.com
, not over 40 ) for 24 hours.
Day 1 Day 7-10
Green sprout White sprout
5. 500W Water Auto Heater
PATENT
CM
C US
Intertek
P17103002 4010499
GrowWall2
Hydroponics Green Wall
Ver.: 180322
Quick Guide Manual