OPCOM Farm GrowWall2G Quick Manual

GrowWall2G
Thank you for purchasing OPCOM Farm GrowWall2G, the indoor hydroponics growing system. It is designed
with easy to use and efficient growth by one-touch AUTO mode. It holds up to 48 plants capacity. Read the
quick guide carefully before setting it up. For detailed user guide video, please scan the QR code or visit
GrowWall2G page at http://www.opcomfarm.com/Growwall2G
A. Assembly
A1. Remove all the parts from box and check all the accessories.
System System
LED LED
L3 L3
Control Box x 1
L2 L2
LED LED
LED Growth Tube L32T x 3
Planting Kit
L1 L1
1. Small Filter Bag x20pcs
AC AC
2. Large Filter Bag x20pcs
PUMP PUMP
Water Tank Water Tank AC Cable AC Cable
A2. Assemble GrowWall2G main body.
1. Assembly
Clockwise assembled Base Stand into L1 layer
1
Assemble top layer and through the LED wire into the right hole on
2
the top layer.
Follow the number of layers corresponding to the above picture, from
3
down to up, insert the base brackets (with pad) into L1 and lock; then
insert the supporting brackets into L2 and lock; repeat the previous
action till L3 is locked
Attach the control box by buckles.
4
2. Water Line setup
Connect the water pipe with the pump and and move it to throughthe
5
hole at the left side of the water tank and move it up alone with the
notch in the left side tower and to the top layer. Then connect water
pipe with the J shape water outlet("J" Tube) and put it in the top layer.
Insert the water pipe(Tube1) in the second layer into the notch at the Insert the water pipe(Tube1) in the second layer into the notch at the
4 6
right side and follow the same step to insert the water pipe(Tube1) to
first layer at left side and then put the water pipe(Tube2) into the water
tank.
3. Electric Line setup
Connect the cables to corresponding LED light, control box & motor
7
according to the mark on the cable
4. Other Installations
Put the screw on the top of layer and stand the body vertically. Please
8
place against the wall with 6 inches (150mm) distance
Add 10.5 gallons (80% full) water into water tank.
9
You can adjust the water flow according to the plant's need.
10
(turn the clockwise to increase water, turn the counterclockwise to
decrease the water)
Chart I: Control Box Mode
Fuction Status Light Time(On/Off) Fuction
Auto 16H/8H
ON 24H/0H
Led High 18H/6H Pump
Low 10H/14H
OFF 0H/24H
Most plants can be grown using the AUTO mode.
* *
AC Cable "J" Tube Hose x 1
PUMP
Pump Planting Partition x 6
Manual
3. Grow Sponge (D65*H50mm) Warranty Card
(GP-D65) 10x7PK
2
5
5
5
PUMP
10
1
Status Light Time(On/Off)
Auto 48 cycles/day ( 10 mins/cycle )
ON 48 cycles/day ( 15 mins/cycle )
High 4 cycles/day ( 10 mins/cycle )
Low 2 cycles/day ( 10 mins/cycle )
10.5 gallons （40L）
OFF
you can reset the product timeline by pushing the LED button for 2 sec.
☑
Please read and follow every steps to avoid any malfunction.
B. Planting
B1.Planting Process: Buy plants from local stores
Choose a suitable filter bag size for 2", 3", 4" pot, put it into the
1
filter bag and tie the strings(Fig1), For 5", 6" pot, remove the pot
and put it into 4" filter bag, tie the strings and put into tranfer
pot(optional)(Fig2) ; Then put the plants into tank(Fig3)
2"
(Fig1)
2"x 8pcs
1Line
Tube(1) x 2 Tube(2) x 2 Soil F Soil Free: Remove pot(Fig1) and put into filter bag(Fig2) and then move
2
to the product(Fig3).
Wall Mount
Brackets x 2 Base Standx2
(Fig1)
Quick Guide Manual
Combination: You can
3
grow hole of GrowWall2G
Quick Guide Manual
C. Optional Accessories
1. Grow Kit for GrowWall2G
6
A. Seedling Kit:
4
B. Nourishment:
2. EC Meter *1pcs
7
D. Seedling
7
LED Pump
D1. Sprout stage
1. Add water into the seedling tray, up to the water (red) line.(Fig1)
2. Open Grow Sponge package, put the sponge into water of seedling tray(make sure the front side with
the seed label is up), press the sponge into water 5 seconds and let the sponge absorb water completely.(Fig1)
3. Place the seedling tray with cover in the shade or cover it with black cloth(to block light).(Fig2)
3
4. Spray water and keep the sponge wet every day.
5. During 7 days(leaf plant), find the sprouted one in the tray; pick it out, and move it into growing
hole(make sure the sponges line up with the black dot on the partition)and keep the remaining
seedling(Fig3).
6. Add 1 pack of NT-Starter to the water tank.
7. Discard unsprouted sponge after regular germination time.
8
* Different plant may have different germination time, please check it before plant.
Chart II: Plant Stage
Basil, Lemon Balm
9
Sprout Stage
Young plant stage
Growing Stage
* Please keep the seedling sponge package in refrigerator if you don't use it.
* If you need more planting information, please vist to www.opcomfarm.com to read "Plant Q&A".
B2. Flower Selection
3" 4"
(Fig2) (Fig3)
5" 6"
3"x 5pcs 4"x 4pcs
1Line 1Line
2" Pots x 16pcs
(Fig2) (Fig2) (Fig3)
mix different size of pots and sponges in the
Free combination
(Grow from seeds hydroponically)
Seedling tray(ST-70) Grow Sponge 2x60pk
(521*189*82mm)x2 (OASS01K For Green Lettuce)
NT-Starter x3 pcs NT-Adjuster x15 pcs
(OAMS26K for 40L) (OAMS29K for 40L)
3. pH Meter *1pcs 4. OPCOM Wave Clip
Planting Time LED Mode Pump Mode Nourishment
Day 0~7 N/A N/A N/A 20℃- 25℃
Day 3~14 ON ON NT-Starter 15℃- 30℃
After Day 14 Auto Auto NT-Adjuster 15℃- 30℃
* For your expected plant amout, you can refer to the sprout rate of 1st planting cycle.
Formaldehyde Clean
Rainbow Tree Chlorophytum Lucky Bamboo Chrysanthemum Snake Plant
Trichloroethylene Clean
Dot plant Wax Plant Gerbera daisy Barberton daisy Dragon tree
Xylene Clean
Flaming lily Evergreen
Dumb cane Tuberous Sword Fern Pteris cretica
Carbon dioxide & Formaldehyde Clean
White Bunny Ears Golden Barrel Mottled Spurge Turk's Cap Cactus Golden Ball Cactus
Carbon Monoxide Clean
Ivy Peace Lilies Parlour Palm Aloe Spiral-leaved croton
Grow Sponge 2x60pk Grow Sponge 2x60pk
(OASS02K For Red Leaf Lettuce) (OASS06K For Basil)
C. pH adjusters:
pH+ *15 pH- *15
5. 500W Water Auto Heater 6. 5/6" Transfer Pod*10pcs
(Fig1)
(Fig2)
(Fig3)
T (℃)
RH EC pH Notes
80% 0.5-1.0 5.5-6.5 The sponge is fully wetin seedling tray.
45%-70% 1.0-2.0 5.5-6.5 Check the water alarm light
45%-70% 1.0-2.0 5.5-6.5 Refer to B3-4