Familiarizing Yourself With The Remote Control - Samsung SP43H3HT Owner's Instructions Manual

Familiarizing Yourself with the Remote Control

The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function
Used to display the next
stored channel.
Used to display the
previous stored channel.
to Used to display the corresponding channels.
➢
For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this will
result in a single digit channel being displayed.
-/--/--- Used to select a channel numbered ten or over.
Press this button, and the "--" or "---" symbol is displayed.
Enter the two or three-digit channel number.
PRE-CH Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
select the frist channel, then use the numeric buttons to
select the second channel. Then, use the PRE-CH button to
quickly alternate between them.
Used to increase the
volume.
Used to decrease the
volume.
MUTE Used to switch the sound off temporarily.
➢
( ) To turn the sound back on, press this button again, or
press the
MENU Used to display the
( ) on-screen menu system.
-
-
TV Used to switch the
( ) television on when it is
in Standby mode.
EXIT -
( )
Menu Function
-
-
-
-
or button.
Used to return to the previous
menu or normal viewing.
Used to:
◆ Display a sub-menu
containing selections for
the current menu option
◆ Increase/decrease a
menu option value
Used to confirm your choice.
Used to exit from the menu
system and return to normal
viewing directly
Used to exit from any
display.
English - 13