Checking The Firmware Version - PIONEER DJ DDJ-1000 Firmware Update Manual

E. Checking the firmware version
Check the firmware version of the DDJ-1000 as described in "A. Checking the current firmware version of DDJ-1000".
When you find the version you wanted, the firmware update is successfully complete.
Tips: When [Your DDJ-1000 is not recognized] is shown during updating the firmware
When the following message appears after selecting a language, check the following tips.
・
Is the USB cable connected to the USB-A terminal?
If it is not connected, connect the cable to the USB-A port and start the updating steps from the beginning again.
・
When the above message appears even if the cable is connected to the USB-A terminal, please follow the steps below.
1) Uninstall the driver software of the DDJ-1000.
How to uninstall the driver software:
✓ For Mac users:
Double click the driver software and then double click [DDJ-1000 Uninstaller.app].
Follow the instructions on your computer after this.
✓ For Windows users:
Click [Start] menu > [Control panel] > [Programs and Features].
Then right-click [DDJ -1000 Driver]. Click [Uninstall] in the context menu.
The latest driver software is available from the following link.
pioneerdj.com/en/support/
2) Update the firmware again from the beginning.
3) After completing the firmware update, install the driver software again.
Please see the Operating Instructions to learn how to install the driver software.
2nd Edition En 7 / 8