Checking The Digital-Signal Strength; Using The R.surf Feature - Samsung SlimFit TX S3080WH Owner's Instructions Manual

Checking the Digital-Signal Strength

Unlike analog channels, which can vary in reception quality from "snowy" to clear, digital (HDTV) channels have either perfect
reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can,
however, adjust your antenna to improve the reception of available digital channels.
Channel
Antenna : Air
Auto Program
Channel Manager
Name
Fine Tune
Signal Strength
Move Enter
Signal Strength
Enter

Using the R.Surf Feature

This feature allows you to set the TV to return to a particular channel after a certain amount of time. For example, you may be
watching a channel when commercials start. You can set the R.Surf to "5 minutes", then switch channels. After 5 minutes, the TV will
return to the original channel. To use the R.Surf feature:
Surf 1:30
1. Press the MENU button to display the menu.
Press the
ˆ
ˆ
2. Press the
ˆ
button.
ˆ
ˆ
If the signal strength meter indicates that the signal is weak, physically adjust
ˆ
your antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest
signal.
Return
Press the EXIT button to exit
OK
Return
Press the
S.STRENGTH
1. While you are watching the channel to which you want to return, press the
R.SURF button. The "Surf Off" is displayed.
2. Press the R.SURF button again to set the timer in thirty second intervals, up to
five minutes.
The time will start decreasing while you are setting up the timer, and will reset after 5
minutes has passed or you turn it off.
3. The time you set will begin counting down on the screen. When the time runs
out, the TV will return to the channel you were watching when you set the timer.
English-34
or button to select "Channel", then press the ENTER button.
or button to select "Signal Strength", then press the ENTER
button on the remote control to check the signal strength.