Channel Control
Selecting the Antenna
Channel
Antenna
Auto Program
Channel Manager
Name
Fine Tune
Signal Strength
Move
Enter
Adding and Erasing Channels
You can add or delete a channel to display the channels you want only.
To use the Channel Manager function, first run Auto Program (see page 17).
Channel
Antenna
Auto Program
Channel Manager
Name
Fine Tune
Signal Strength
Move
Enter
Channel Manager
All
Added
Favorite
Default List Mode : All
Move
Enter
Channel Manager /All
Air 8
DTV Air 2-1
DTV Air 10-2
Air 4
DTV Air 10-3
Air 6
DTV Air 11-1
DTV Air 7-1
DTV Air 11-2
Air 8
DTV Air 11-3
Air 9
DTV Air 12-1
Air 10
DTV Air 12-2
DTV Air 10-1
DTV Air 12-3
List Mode
Page
Move
Enter
1. Press the MENU button to display the menu.
Press the
: Air
Air
Cable
2. Press the ENTER button to select "Antenna".
Press the
button.
Press the EXIT button to exit.
Return
Press the ANTENNA button on the remote control to select Air or Cable.
If the antenna is connected to ANT 1 IN (AIR), select
"Air" and if it is connected to ANT 2 IN (CABLE), select
"Cable".
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are
connected, select the antenna input you want. If the
antenna input is not selected properly, noise may
appear on the screen.
1. Press the MENU button to display the menu.
Press the
: Air
ˆ
button.
ˆ
ˆ
2. Press the
ˆ
ˆ
ENTER button.
ˆ
Return
3. Press the ENTER button to select "All".
ˆ
ˆ
ˆ
ˆ
Return
4. Press the
ENTER button.
1/2
Press the
Air 13
DTV Air 13-1
to delete the channel.
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
Air 17
DTV Air 12-2
Air 28
Delete All
Return
or
button to select "Channel", then press the ENTER button.
or
button to select "Air" or "Cable", then press the ENTER
or
button to select "Channel", then press the ENTER
or
button to select "Channel Manager", then press the
or
button to select a channel to delete, then press the
or
button to select "Delete", then press the ENTER button
English-30
or
Continued...