Customizing Your Remote Control; Setting Up Your Remote Control To Operate Your Vcr (Cable Box Or Dvd Player) - Samsung SlimFit TX R3079WH Owner's Instructions Manual

S F
P E C I A L E AT U R E S

Customizing Your Remote Control

Your TV comes equipped with a universal remote control. In addition to controlling the TV,
the universal remote control can also operate a VCR, Cable box, DVD, and set-top box.
The remote control might not be compatible with all VCRs, DVD players, Cable box, and
•
set-top box.
Setting Up Your Remote Control to Operate Your VCR (Cable box
or DVD player)
1
Turn off your VCR (Cable box or DVD player).
2
Press the MODE button to switch the remote control to the VCR (CABLE or
DVD) mode.
3
On your Samsung remote control, press the SET button.
4
Enter 3 digits of the VCR (Cable box or DVD player) code listed on next page
for your brand of VCR (Cable box or DVD player).
5
Press the POWER button on the remote control. Your VCR (Cable box or
DVD player) should turn on. If your VCR (Cable box or DVD player) turns on,
your remote control is now set correctly.
6
Once your remote control is set up, press the MODE button any time you
want to use the remote to operate your VCR (Cable box or DVD player).
• When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP,
PLAY/PAUSE, and FF) will still operate your VCR (or DVD player).
• When your remote control is in the STB, VCR, CABLE, or DVD mode, the volume buttons still
control your TV' s volume.
English - 74
œ The remote control has five
modes: TV, STB, VCR, CABLE,
and DVD.
œ Make sure you enter 3 digits
of the code, even if the first digit
is a "0". (If more than one code
listed, try the first one.)
œ If your VCR (Cable box or
DVD player) does not turn on,
repeat steps 2, 3, and 4, but try
one of the other codes listed for
the brand of your particular VCR
(Cable box or DVD player).