Customizing Your Remote Control; Setting Up Your Remote Control To Operate Your Vcr - Samsung CL14A8 Owner's Instructions Manual

C h a p t e r F o u r
S F
P E C I A L E AT U R E S

Customizing Your Remote Control

Your TV comes equipped with a "universal" remote control. In addition to
controlling the TV, the universal remote can also operate a VCR and a cable box (even if
your VCR and cable box are made by manufacturers other than Samsung).

Setting Up Your Remote Control to Operate Your VCR

1
Turn off your VCR.
2
On your Samsung remote control, press SET.
3
Press the VCR button on the top right of your remote control.
4
Enter both digits of the VCR code listed on the next page for
your brand of VCR.
5
Press the POWER button on the remote control. Your VCR
should turn on. If your VCR turns on, your remote control is
now set correctly.
6
Once your remote control is set up, press the VCR button any
time you want to use the remote to operate your VCR.
The remote control has three
"modes": "TV," "VCR", and "Cable"
Press the "VCR" button to switch the
remote control to the "VCR" mode.
Make sure you enter both digits of
the code, even if the first digit is a "0."
If more than one code listed, try the
first one.
If your VCR does not turn on,
repeat steps 2, 3, and 4, but try one
of the other codes listed for the
brand of your particular VCR.
If no other codes are listed, try each
code, 00 through 72.
When your remote control is in
the "VCR" mode, the volume buttons
still control your TV' s volume.
When your remote is in the "TV"
mode, the VCR control buttons (PLAY,
PAUSE, etc.) will still operate your
VCR.
C F : S
HAPTER OUR
4.1
F
PECIAL EATURES