HEADRUSH Gigboard Quick Start Manual page 7

Views
HeadRush Gigboard's four footswitches can be used to
activate or bypass models (amps, cabs, or effects) as well as
select scenes, rigs or setlists. These footswitches are always in
one of four modes: Stomp View, Rig View, Hybrid View, and
Setlist.
To change the view:
1. Press and hold footswitch 1. Then select from the four
footswitches which correspond to the four views: Stomp,
Rig, Hybrid, and Setlist.
2. Press a footswitch to enter that view.
Stomp View
Footswitches 1-4 correspond to models (amps, cabs, or effects)
or scenes in your rig. Press a footswitch to activate or deactivate
its model.
Rig View
The first 2 footswitches correspond to rigs you have saved.
Press a footswitch to load its rig.
To show the previous bank of two rigs, press footswitch 3.
To show the next bank of two rigs, press footswitch 4.
Hybrid View
The first 2 footswitches can be assigned to activate or
deactivate a model, or select a scene in the currently selected
rig.
To switch to the previous rig, press footswitch 3.
To switch to the next rig, press footswitch 4.
Setlist View
To enter the All Rigs setlist, press footswitch 1.
To enter the currently shown setlist, press footswitch 2.
To show the previous setlist, press footswitch 3.
To show the next setlist, press footswitch 4.
7