HEADRUSH Gigboard Quick Start Manual page 12

Expression Pedal
You can connect an optional expression pedal (sold separately) to control two parameters (in Classic Mode) or
two sets of parameters (in Advanced Mode). If your expression pedal has a toe switch, you can use the toe switch
to switch between them—Expression Pedal A or B.
The column of four boxes represents the expression pedal settings. You can
assign one or more continuously adjustable parameters (ones with a range of
values) to the expression pedal.
To set the expression pedal mode, tap the button above Range in the
upper-right corner to select Classic or Advanced.
•
Classic: You can assign one parameter to each expressional pedal (A
and B). Using the toe switch will select the other expression pedal and
deactivate (bypass) the current expression pedal's parameter. For
instance, if you assign a wah pedal to Expression Pedal A and a volume
pedal to Expression Pedal B, only one of them will be active at any time;
when you are controlling the wah pedal, the volume pedal will be
bypassed, and vice versa.
•
Advanced: You can assign up to four parameters to each expression pedal (A and B). Moving the pedal
will adjust all of its assigned parameters simultaneously. Using the toe switch will select the other
expression pedal and leave the current pedal's parameters active and at their maximum values.
To assign a parameter to an expression pedal:
1. If the Assign button is not on, tap it.
2. Tap a box under the Assign button.  indicates an empty box.
3. In the list that appears, tap the model with the parameter you
want to assign.
4. In the list that appears, tap the parameter you want to
assign.
Tap Unassigned  to unassign that box.
To swap two assignments (while in Advanced Mode), tap and
drag one of them over the other, and then release it.
To set the range of an assigned parameter:
1. If the Range button is not on, tap it.
2. Tap a value under the Range button.
3. Turn the encoder to set the desired value as a percentage of the parameter's entire range.
Press the encoder or tap elsewhere to confirm the value.
12