Connecting A Camcorder - Samsung DynaFlat TX-P3076WH Owner's Instructions Manual

AA68-03388A-00_eng_Chapter2
I
N S TA L L AT I O N

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow
you to view the camcorder tapes without using a VCR. (Also see "Viewing an External Signal
Source" on page 44).
4/21/04 5:24 PM
1
Locate the A/V output jacks on the cam-
corder. They are usually found on the side
or back of the camcorder.
2
Connect an audio cable between the
AUDIO OUT jack on the camcorder and
the AUDIO terminals on the TV.
3
Connect a video cable between the
VIDEO OUT jack on the camcorder and
the VIDEO(or S-VIDEO) terminal on the
TV.
The audio-video cables shown here are
usually included with a Camcorder.
(If not, check your local electronics
store.) If your camcorder is stereo, you
need to connect a set of two cables.
Page 23
23