Memorizing The Channels; Selecting The Video Signal-Source - Samsung DynaFlat TX R2678WH Owner's Instructions Manual

O
P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air"
(antenna) and cable channels. After the available channels are memorized, use the
CH and CH buttons to scan through the channels. This eliminates the need
to change channels by entering the channel digits. There are three steps for
memorizing channels: selecting a broadcast source, memorizing the channels
(automatic) and adding/deleting channels (manual).

Selecting the Video Signal-source

Before your TV can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button.
Press the ... or † button
to select "Channel", then
press the ENTER button.
2
Press the ENTER button to
select "Antenna".
Press the ... or † button to
select "Air" or "Cable", then
press the ENTER button.
3
Press the ... or † button
to select "Auto Program",
then press the ENTER
button.
Alternate method:
Press the AUTO. PROG
button on the remote
control to select the Auto
Program.
T V Channel
Antenna : Air
Auto Program
Add/Delete
Favorite Channels
Name
Fine Tune
Signal Strength
T V Channel
Antenna : Air
Air
Auto Program
Cable
Add/Delete
Favorite Channels
Name
Fine Tune
Signal Strength
T V Channel
Antenna : Air
Auto Program
Add/Delete
Favorite Channels
Name
Fine Tune
Signal Strength
T V Auto Program
Select the antenna connection
ANT A ANT B
Air None
Cable None
Air Cable
Cable Air
English - 31
√
√
√
√
√
√
√
√
√
√
√
√
√
√