Memorizing The Channels; Selecting The Video Signal-Source - Samsung LTM 1575W Owner's Instructions Manual

O
P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (antenna)
and cable channels. After the available channels are memorized, use the CH
CH
by entering the channel digits. There are three steps for memorizing channels: selecting a
broadcast source, memorizing the channels (automatic) and adding and deleting channels
(manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button to
display the menu.
Press the CH
select "Channel", then
press the VOL + button.
2
Repeatedly press the
VOL + button to cycle
through these choices:
ANT (antenna), STD, HRC
or IRC (all cable TV).
Note: STD, HRC and IRC identify various types of cable TV
systems. Contact your local cable company to identify the type
of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed to
"Storing Channels in Memory" (next page).
3.5
C T : TV O
HAPTER HREE PERATION
buttons to scan through the channels. This eliminates the need to change channels
button to
C h a n n e l
ANT/CATV Ant
Auto Program
Fine Tune 00
LNA : Off
TV/Video TV
Menu
Move Select
C h a n n e l
ANT/CATV STD
Auto Program
Fine Tune 00
LNA : Off
TV/Video TV
Menu
Move Select
and