Connecting A Camcorder - Samsung DynaFlat TX R2678WH Owner's Instructions Manual

I
N S TA L L AT I O N

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow
you to view the camcorder tapes without using a VCR. (Also see "Viewing an External Signal
Source" on page 44).
1
Locate the A/V output jacks on the
camcorder. They are usually found on
the side or back of the camcorder.
2
Connect an audio cable between the
AUDIO OUT jack on the camcorder and
the AUDIO terminals on the TV.
3
Connect a video cable between the
VIDEO OUT jack on the camcorder and
the VIDEO(or S-VIDEO) terminal on the
TV.
The audio-video cables shown here are
usually included with a Camcorder.
(If not, check your local electronics
store.) If your camcorder is stereo, you
need to connect a set of two cables.
English - 23