Y
N
D
O U R
E W
I G I TA L
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
For more information on connecting equipment, see page 14~24.
Œ Audio-Video Output jacks
Connect to the audio/video input jacks of a
recording VCR.
´ AUDIO Input jacks
Connect to the audio output jacks of VCRs, DVD
players and similar devices.
ˇ VIDEO Input jacks
Connect to the video output jacks of VCRs,
DVD players and similar devices.
¨ HDMI Video Input jack
(High Definition Multimedia Interface)
Connect to the HDMI jack for device with HDMI
output.
ˆ S-Video Input jack
Connect to S-Video output jack of an S-VHS VCR
or DVD player.
T V
English - 11
Ø SERVICE
For service only.
∏ DGITAL AUDIO OUT
(OPTICAL)
Connect to a Digital Audio component.
" ANTENNA terminals
Two independent cables or antennas can be
connected to these terminals. Use ANT1IN and
ANT2IN terminals to receive a signal from
VHF/UHF antennas or your cable system.
' Component Input jacks
(Y, P
, P
, AUDIO-L/R)
B
R
Connect to the Component audio and video
outputs of DVD or DTV set-top box.
480i/480p/720p/1080i Y, P
inputs are available./
and P
video signal
B
R