Rear Panel Jacks - Samsung CL28A20HE Owner's Instructions Manual

Y
O U R

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are three sets of input jacks, you can connect three different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 11 – 18.
ΠAUDIO-VIDEO MONITOR
´,Ø VIDEO/AUDIO INPUT jacks
ˇ SUPER VIDEO INPUT jack
8
N T V
E W
OUTPUT jacks
These audio-video signals are identical to A/V
signals being displayed on the big screen. (Typically
used as the input signals for a recording VCR.)
Video and Audio signals from VCRs, DVD players
and similar devices.
Note: The common jack of component 1 and AV2,
component 2 and AV3 input jacks are exclusive rela-
tion with each other.
S-Video signal from an S-VHS VCR or DVD
player.
Note: In S-Video mode, Audio Output depends what
kind of audio input source is connected to the side
audio input jacks (AV1).
¨ VHF/UHF
Connect to an antenna or to a cable TV system.
ˆ COMPONENT 1, 2 INPUT
jacks
(480i/480p/1080i)
Connect to the audio and component output jacks of
a DVD player or Set-Top Box.
Note: Only black and white signals are output from
a monitor in DVD/DTV mode.