Weber Maschinentechnik GmbH CR 7 HD Operating And Maintenance Manual page 7

Honda gx 390
Table of Contents

Advertisement

Inspection
Compactors must be inspected in accordance with the corresponding implementation conditions and
operating conditions, as needed; however an inspection to ensure operationally safe status must be
performed by an expert at least once a year. The results of the inspection must be recorded in writing
and must be stored at least until the next inspection.
Cleaning work
Prior to cleaning the compactor with a high-pressure cleaner, protect all accessible energized
switches, cable connections, etc. against water penetration by masking them off.
Cleaning tasks should only be executed in areas that are suitable and have been approved for this
purpose (oil separator amongst others).
Disposal
All operating fluids and auxiliary materials must be disposed of in an environmentally-compatible
manner in accordance with country-specific regulations.
Important information for operating and maintenance personnel is marked by pictograms.
Warning against irritants or materials hazardous to health
Warning against a hazardous place
Warning against a suspended load
Wear ear protection
General regulation
Environmental protection
Hard hat
Safety shoes
Protective gloves
CR 7 HD
7

Advertisement

Table of Contents
loading

Related Products for Weber Maschinentechnik GmbH CR 7 HD

Table of Contents