Table of Contents
Advertisement
Check the fuel level
Open the cover (1), unscrew and remove the gas cap (2),
check the fill level and, if necessary, top off with clean
unleaded gasoline to the lower edge of the filler neck in
accordance with the specification.
For work at the fuel system, have a suitable fire-
extinguishing agent at the ready.
Fire, naked light, and smoking is forbidden!
Check the hydraulic fluid level
Check the hydraulic oil level when the machine is at
operating temperature. The correct oil level is reached
when the oil is in the middle of the oil sight glass.
Mounting the attachment plates
Tighten the screws (1) of the attachment plates with a torque
of 425 NM.
Installing the protective mat
Fasten the protective mat with holder, screws, spring-lock
washers and nuts on the base plate front and rear.
Ensure that the protective mat rests under the base plate.
CR 7 HD
1
2
1
13
Advertisement
Table of Contents
