Table of Contents
Advertisement
Starting
Turn the short-circuit button to the "ON" position.
Slide the lever of the fuel cock (1) to the right.
Slide the choke lever (2) to the left (close).
After the engine has warmed up, slide the choke lever
(2) to the right (open).
Bring the gas lever into full-throttle position.
Slowly tighten the handle (1) of the reversing starter until
resistance is noticeable.
Allow the handle (1) to glide back into the initial position,
and then forcefully and completely pull it through with both
hands.
Allow the engine to warm up for a few minutes.
14
2
1
1
CR 7 HD
Advertisement
Table of Contents
