D-Link DLM-3500 Quick Installation Manual page 5

2.2 Access to the Web-based UI
The Web-based UI enables you to easily perform every configuration task. Follow the steps below to access
the Web-based UI.
1. Connect your PC Ethernet LAN interface to LAN port of DLM-3500 with a cross-over cable, which is in
standard packing. The default management LAN port of DLM-3500 is LAN port.
2. After powering on DLM-3500, the LED of LAN port will turn on. This indicates that it is on-line.
3. Check that the proxy setting of your IE browser is turned off, no proxy server is required in order to
access DLM-3500's Web-based UI. Open IE, select Internet Option on the menu bar of Tools, click the
Connection tab, and then click LAN settings to open Local Area Network Settings dialog box, under
Proxy server, make sure proxy server is not selected.
5. In the URL filed of IE, type in
6. DLM-3500 provides two types of user accounts:
admin – Has privileges to monitor and modify system parameters.
monitor – Has privileges to monitor only.
DLM-3500 allows up to 1 administrator and 1 monitor to access concurrently.
Default password for admin and monitor are "admin" and "monitor", respectively. We strongly recommend
you to modify the passwords at the first time you log into the web-based UI.
DLM-3500 Quick Installation Guide
4.
http://192.168.0.1 to access the Web-based UI.
5