1. Click
button to create new configuration.
2. Configuration of filter includes "When", "Source", "Destination" and "Service". In this example, we
configure [When] as "All-Time", [Source] as "Any", [Destination] as "WAN" and [Service] as "Any".
3. In [Routing Policy] field, it includes two sub-fields [Algorithm] and [Parameter]. In this example,
we do load balancing with WAN 1 and WAN 2 in algorithm "Run Robin". So we configure
[Algorithm] as "By Weight", then set weight of WAN 1 and WAN 2 as "1" in [Parameter].
4. Press [Apply] to update all the parameters you have just entered.
So far, we have only mentioned the basic operations of the Web-based UI and how to basically integrate
DLM-3500 into your present network environment with simple outbound WAN Load-balancing.
For further information, please refer to the User's Manual of DLM-3500
DLM-3500 Quick Installation Guide
14