Install Filters - Best IPB9 Manual

INSTALL FILTERS

DUCTED HOODS
NOTE: Prior to use, remove protective film
from the filter frame.
1. To remove the GREASE filter, (Fig.16) push
the filter towards the front so that it clears the
filter channel, then pull down on the handle
to disengage the filter from the hood. Tilt the
filter downward and remove.
2. The grease filters and the drip tray (see
page 5 for removal & cleaning instructions)
should be cleaned frequently. Use a warm
detergent solution. Grease filters and the
oil collectors are dishwasher safe.
3. To install the GREASE filter, align rear filter
tabs with spring in the hood. Pull down
handle, push filter into position and release.
Make sure the filter is securely engaged
after installation.
- 14 -
FIG. 16