Connecting A Vcr - Samsung CL-29M30HS Owner's Instructions Manual

Samsung colour television owner's instructions
Hide thumbs Also See for CL-29M30HS:
Table of Contents

Advertisement

I
N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna
or a cable TV system (according to the instructions on pages 11~14).
Please be sure to match the color coded input terminals and cable jacks.
1
Connect a coaxial cable between the
"ANT IN " terminal on the TV and the
antenna out terminal on the VCR.
A coaxial cable is usually included with
a VCR. (If not, check your local
electronics store).
2
Connect a set of audio cables between
the "AV IN 1 (L, R)" (or "AV IN 2/3 (L,
R)") jacks on the TV and AUDIO OUT
jacks on the VCR.
If you have a mono VCR, connect
L(mono) to VCR audio out using only
one audio cable.
3
Connect a video or S-video cable
between the "AV IN 1 (VIDEO)" ("AV IN
2/3 (VIDEO)" or "S-VIDEO IN") jack on
the TV and the VIDEO OUT jack on the
VCR.
Refer to your VCR' s instructions for
more information about how to view
your VCR tape.
• Also, you can connect to "AV IN 1" on the side panel of TV.
TV Rear Panel
2
English - 15
1
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl-34m30hsCl-29z30hsCl-32m30hs

Table of Contents