Beaming Files - Samsung SPH-I325 User Manual

Highlight a device and press Menu (right softkey) > Edit.
3.
Use the keypad and
4.
(left softkey).
5. Highlight an option and then press
the option.
Press Done (left softkey).
6.
To delete a Bluetooth device from your list:
1. Press the Power button, select Wireless Manager and press
Highlight the Bluetooth field and press Menu (right softkey) > Bluetooth
2.
Settings.
Highlight a device and press Menu (right softkey) > Delete.
3.
4. From the Confirm screen, press Yes (left softkey) to delete the device or
press No (right softkey) to cancel.

Beaming Files

Using an active Bluetooth connection, you can beam any data file (Contacts,
pictures, video, text, etc.) directly to another Bluetooth device. Both devices must
be active ( ), with visibility turned on, and the recipient must accept the
incoming data.
When you send data to another user, it is up to the recipient to either accept the
incoming data or reject the connection. If you are sending a picture to a Bluetooth-
compatible printer, you may need the passcode to establish a connection.
Beaming Contacts via Bluetooth
1. Press Start > Contacts.
Select an entry and press Menu (right softkey) > Send Contact > Beam.
2.
(Your device will search for and list all discovered Bluetooth devices.)
Note: Each device that appears in the above search will initially appear as
"Unknown device." After a short time the correct display names will appear.
Highlight a device and press Beam (left softkey) to send the name card
3.
to this recipient. (The recipient's device will display an onscreen
message asking whether they would like to receive and save your
Contact entry to their list.)
102 Bluetooth
to change the device name and press Next
to check or uncheck the box for
.