Technical Data - AEG HK955070FB User Manual

16 www.aeg.com
Problem
You can hear a constant
beep noise.
comes on.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass

9. TECHNICAL DATA

9.1 Rating plate
Model HK955070FB
Typ 60 HCD AA AO
Ser.Nr. .................
AEG
9.2 Cooking zones specification
Cooking zone
Left front
Left rear
Middle rear
Right front
Right rear
For optimal cooking results use
cookware no larger than the diameter of
the cooking zone.
Possible cause
The electrical connection is
incorrect.
The second phase of the
power supply is missing.
Nominal Power (Max heat set-
ting) [W]
1800
1200
1050 / 1950 / 2700
1800
1400 / 2200
Remedy
Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the
installation.
Check if the hob is correctly
connected to the electrical
supply. Remove the fuse,
wait one minute, and insert
the fuse again.
surface) and an error message that
comes on. Make sure, you operated the
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The instructions about the
Service Centre and conditions of
guarantee are in the guarantee booklet.
PNC 949 597 196 01
220 - 240 V 50 - 60 Hz
Made in Germany
7.9 kW
Cooking zone diameter [mm]
180
145
145 / 210 / 270
180
170 / 265