Diono mXT Instruction Manual page 9

• IMPORTANT:
While every care has been taken to design this child
safety seat with smooth and rounded contacting surfaces, Diono is not
responsible for any damage occurring to vehicle seats or seat belts.
• IMPORTANT:
To prevent injury due to product deterioration, do not use
this booster seat if it has been involved in a severe accident or if it is older
than six years.
RETRACTABLE CUP + SNACK HOLDERS
Cup and snack trays are located on both sides
of seat bottom: swivel outward to the locked po-
sition for use. Swivel inward to the recessed and
locked position when not in use.
• IMPORTANT:
Do not step on or put excess
weight on the cup and snack trays, as this
could cause it to break.
• CAUTION: DO NOT
Attaching the Backrest
1) Lay backrest on flat surface with front facing down. (Fig. 2A.1)
2) Hold seat bottom facing down. Align seat bottom pivot bar at 90º angle
with backrest hooks. Push in to attach seat bottom to backrest. (Fig. 2A.2)
3) Rotate seat bottom downwards and under backrest until a 'click' is heard
and the seat shape is formed. (Fig. 2A.3)
4) Fasten screws tightly for permanent attachment. (Fig. 2B)
use with hot liquids, as this could burn a child.
9