Links; Specifications - TC Electronic DITTO JAM X2 LOOPER User Manual

10
DITTO JAM X2 LOOPER User Manual
notes regarding batteries
– Batteries must never be heated, taken apart or thrown into fire or water.
– Only rechargeable batteries can be recharged.
– Remove the batteries when the pedal is not being used for a longer period of
time to save battery life.
– Dispose batteries according to local laws and regulations.

7. Links

Support resources
• TC Electronic Support: tcelectronic.com/support/
• TC Electronic – product software:
• TC Electronic – all product manuals:
• TC Electronic user forum: forum.tcelectronic.com/
TC electronic on...
• the Web: tcelectronic.com/
• Facebook: facebook.com/tcelectronic
• Google Plus: plus.google.com/+tcelectronic/
• Twitter: twitter.com/tcelectronic
• YouTube: youtube.com/user/tcelectronic

8. Specifications

Maximum loop length 2 minutes
Maximum no. of overdubs Unlimited
Bypass mode True Bypass
(buffered bypass selectable via DIP switch)
Latency None (analog dry-through)
Dimensions (W x D x H) 113 x 135 x 54 mm (4.4 x 5.3 x 2.1")
Weight 0.57 kg (1.3 lbs)
Input connector Standard TS 1/4" jack
Output connector Standard TS 1/4" jack
Ext Mic input 1/8" TRS, only use included microphone
Standard 9 V DC / >150 mA,
Power input
centre negative (not supplied)
USB Mini-B USB for firmware updates
Memory Selected loop mode is recalled over power
cycles, loops are not.
Due to continuous development, these specifications are subject to change without notice.
tcelectronic.com/support/software/
tcelectronic.com/support/manuals/