Detaching The Stand Base And Body - LG DM2350D Owner's Manual

Using the Kensington security system
The Kensington security system connector is
located at the back of the TV. For more information
of installation and using, refer to the manual
supplied with the Kensington security system or
visit http://www.kensington.com .
Connect the Kensington security system cable
between the TV and a table.
NOTE
The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
ASSEMBLING AND PREPARING

Detaching the Stand Base and Body

1
Place the TV with the screen side down on a
flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth
y y
on the surface to protect the screen
from damage.
When detaching the stand to the
y y
TV, place the screen facing down on
a cushioned table or flat surface to
protect the screen from scratches.
2
Turn the screw to the left, and then pull out the
Stand Base from the Stand Body.
3
Remove 2 screws and pull out the Stand Body
from the TV.
11