Table of Contents
Advertisement
10. Monitor driver installation is completed.
®
Microsoft
Windows
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1. Choose the "OK" button on the "Insert disk" window.
2. Click the "Browse" button on the "File Needed" window.
3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button.
How to install
1. Click "Start," "Setting," and then "Control Panel."
2. Double click the "Display" icon.
3. Choose the "Settings" tab and then click "Advanced."
4. Choose "Monitor."
Case1: If the "Properties" button is inactive, it means your monitor is properly configured.
Please stop installation
Case2: If the "Properties" button is active, click the "Properties" button then follow next steps
continually.
5. Click "Driver" and then click "Update Driver" then click the "Next" button.
6. Choose "Display a list of the known drivers for this device so that I can choose a
specific driver" then click "Next" and then click "Have disk."
7. Click the "Browse" button then choose A:(D:\Driver).
8. Click the "Open" button, then click "OK" button.
9. Choose your monitor model and click the "Next" button then click "Next" button.
10. Click the "Finish" button then the "Close" button.
If you can see the "Digital Signature Not Found" window then click the "Yes"button.
And click the "Finish" button then the "Close" button.
®
Microsoft
Windows
1. Click "Start," "Setting" and then "Control Panel."
2. Double click "Display" icon.
3. Select the "Settings" tab and click the "Advanced Properties" button.
4. Select the "Monitor" tab.
5. Click the "Change" button in the "Monitor Type" area.
6. Choose "Specify the location of the driver."
7. Choose "Display a list of all the driver in a specific location." then click the "Next" button.
8. Click the "Have Disk" button
9. Specify A:\(D:\driver) then click "OK" button.
10. Select "Show all devices" and choose the monitor that corresponds to the one you
connected to your computer and click "OK."
11. Continue choosing "Close" button and "OK" button until you close the Display Properties
dialogue box.
®
Microsoft
Windows
1. Click Start, Settings, Control Panel, and then double-click the Display icon.
2. In the Display Registration Information window, click the Settings tab and then click All
Display Modes.
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency)
and then click OK.
4. Click the Apply button if you see the screen working normally after clicking Test. If the
screen is not normal, change to a different mode (lower mode of resolution, colors, or
frequency).
®
2000 Operating System
®
Millennium Operating System
®
NT Operating System
Advertisement
Table of Contents
