Download Print this page

Samsung SyncMaster XL30 Owner's Manual

Samsung monitor owner's manual
Hide thumbs Also See for SyncMaster XL30:

Advertisement

Quick Links

SyncMaster XL30
SyncMaster XL30

Advertisement

loading

Summary of Contents for Samsung SyncMaster XL30

  • Page 1 SyncMaster XL30 SyncMaster XL30...
  • Page 2 If using a screen saver, set it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Model Important to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock SyncMaster XL30...
  • Page 3 Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage.
  • Page 4: Installation

    This may cause electric shock or fire. Installation Be sure to contact a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor.
  • Page 5 Keep any heating devices away from the power cable. A melted coating may cause electric shock or fire. Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc. Any increase in the internal temperature may cause fire. Put down the monitor carefully.
  • Page 6 a slightly moistened, soft fabric. Do not spray water or detergent directly onto the monitor. This may cause damage, electric shock or fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth.
  • Page 7 do not install inside a vehicle. This may cause a malfunction, electric shock or fire. In particular, avoid operating the monitor near water or outdoors where the monitor could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord.
  • Page 8 Do not insert metal objects such as chopsticks, wire and tools or inflammable objects such as paper or matches into the vent, headphone port or AV ports or etc. This may cause electric shock or fire. If an alien substances or water enters the product, turn the product off, unplug the power connector from the wall outlet and contact the When viewing a fixed screen for an extended period of time, residual...
  • Page 9 Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire. Do not place your children's favorite toys or any other objects of interest on the product. Children may try to climb on the product to retrieve an object. The product could fall, causing injury or even fatality.
  • Page 10 Model SyncMaster XL30 Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking With Stand Without Stand (Monitor & Sliding Stand) Manual...
  • Page 11 DVI-D (Dual link) Cable Power Cord Sold separately USB Cable (A-B Type cable) Others Calibrater For more information on the use of the calibrater, see Natural Color Expert Help. Hood Front...
  • Page 12 MODE button Press this button to select a Color Mode. Continuing to press the (= Color Mode) button, will repeatedly display the setting modes. With the control buttons at the front of the monitor, you can easily implement different color information matching your environment. 1) Custom - Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste.
  • Page 13 Adjust buttons [ Push the button to adjust brightness. ▼ : The screen is getting dark. ▲ : The screen is getting bright. Use this button for turning the monitor on and off. / Power button [ ] / This light glows blue during normal operation, and blinks blue once Power indicator as the monitor saves your adjustments.
  • Page 14 Stand Stopper POWER Kensington Lock USB connection terminal Connecting the Monitor for further information regarding cable connections. Remove the fixing pin on the stand to lift the monitor up and down. 1. POWER S/W : Switches the monitor On/Off. 2. POWER : Connect the power cord for your monitor to the POWER on the back of the monitor.
  • Page 15: Connecting The Monitor

    Connect the monitor to the Macintosh computer using the DVI connection cable. Turn on your computer and monitor. If your monitor displays an image, installation is completed. Connecting USB You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard Model SyncMaster XL30...
  • Page 16 disk drive by connecting them to the them to the PC. The USB port of the monitor supports High-Speed Certified USB 2.0. High speed Data Rate Power Consumption (Max., each port) Connect the UP port of the monitor and the USB port of the computer with the USB cable. To use DOWN port, you have to connect the UP (Upstream Cable) to the PC.
  • Page 17 MP3 player, etc.) You can use other USB devices that can be connected to a computer. When connecting a device to the device using a cable appropriate to the device. (For the purchase of the cable and external devices, ask the service center of the corresponding product.) The company is not liable for problems or damages to an external device caused by using an unauthorized cable for the connection.
  • Page 18 Using ( ),You can swivel the monitor left and right at an angle of 330 ° to set the monitor lengthwise. The rubber under the stand is to avoid the monitor slide. Tilt angle Using ( ), You can adjust the tilt angle forward and backward for the most comfortable viewing angle.
  • Page 19 Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non- specified wall mount is used or the consumer fails to follow the product installation instructions.
  • Page 20 Insert the hooking parts ( ) of both hoods starting from the top and moving downwards into the grooves ( ) near the left and right edges at the back of the monitor. Fit the top part of the monitor into the top of the grooves of both hoods.
  • Page 21 Make sure the video card is fully inserted in it's slot. Reboot the computer. Set the video card by referring to the video card manual. Adjust the resolution and frequency at the video card. (Refer to Preset Timing SyncMaster XL30 Modes) contact dealer. Modes).
  • Page 22 LED is blinking but no Is the frequency properly images on the screen. adjusted when checking the Display Timing on the menu? There are only 16 Have the Windows colors colors shown on the been set properly? screen. The screen colors have changed after Has the video card been set changing the video...
  • Page 23 General General Model Name SyncMaster XL30 LCD Panel Size 30" inch Wide (75 cm) Display area 641.28(H) x 400.8(V) Pixel Pitch 0.2505(H) x 0.2505(V) Synchronization Horizontal 49.3kHz, 98.7kHz +/- 2 kHz Vertical 60 Hz +/- 2 Hz Display Color 8 bit color (16.7M)
  • Page 24 Humidity : 5 % ~ 95 %, non-condensing Power saving EPA/ENERGY mode (Power button) Blue, Blinking Less than 2 Less than 1 watts watts ® Partner, SAMSUNG has determined that this Power off Power off 2000 (Power Switch) Black Black 0 watts ® compliant and ENERGY2000 ®...
  • Page 25 Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Horizontal Display Mode Frequency...
  • Page 26 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. U.S.A 1-800-SAMSUNG(726-7864) CANADA 1-800-SAMSUNG(726-7864) MEXICO 01-800-SAMSUNG(726-7864) ARGENTINE 0800-333-3733 BRAZIL 0800-124-421, 4004-0000 CHILE 800-SAMSUNG(726-7864) COLOMBIA 01-8000112112 COSTA RICA 0-800-507-7267 ECUADOR...
  • Page 27 030-6227 515 3260 SAMSUNG(726-7864) FRANCE 08 25 08 65 65(€ 0,15/Min) 01805-SAMSUNG(726-7864) (€ GERMANY 0,14/Min) HUNGARY 06-80-SAMSUNG(726-7864) ITALIA 800 SAMSUNG (726-7864) LUXEMBURG 0035 (0)2 261 03 710 0900 SAMSUNG(726-7864) (€ NETHERLANDS 0,10/Min) NORWAY 815-56 480 POLAND 0 801 801 881, 022-607-93-33...
  • Page 28 1800-SAMSUNG(726-7864) THAILAND 1800-29-3232, 02-689-3232 TAIWAN 0800-329-999 VIETNAM 1 800 588 889 SOUTH AFRICA 0860-SAMSUNG(726-7864 ) TURKEY 444 77 11 800-SAMSUNG(726-7864) U.A.E 8000-4726 Terms Dot Pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution.
  • Page 29 Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
  • Page 30 You may have additional rights which vary from jurisdiction to jurisdiction and this agreement does not affect any such statutory rights. In no event will Samsung be liable to you in relation to the Adobe Software Products for any damages, claims or costs whatsoever or any consequential,...
  • Page 31 The foregoing limitations and exclusions apply to the extent permitted by applicable law in your jurisdiction. Samsung's aggregate liability related to or in connection with any claims which you able to bring in relation to the Adobe Software Products under the applicable law of your jurisdiction shall be limited to the amount paid for the Adobe Software Products by Samsung.
  • Page 32: Product Information (Image Retention Free)

    PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention.
  • Page 33 The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns.
  • Page 34: Correct Disposal Of This Product (Waste Electrical & Electronic Equipment) - Europe Only

    Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.