Table of Contents
Advertisement
2-2
Installing the Stand
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
Place a soft cloth over the table to protect the product and place the product onto the cloth
so that the front of the product is facing downwards.
Do not remove the stopper pin before installing the base.
Hold the main body of the product with your hand as shown by the figure.
Insert the stand base into the stand connection part in the direction shown in the figure.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
After the installation of the base, stand the monitor up as shown in the figure. Now you can
remove the stopper pin to adjust the stand.
Installing the Product
2-2
Advertisement
Table of Contents
