Table of Contents
Advertisement
4. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand,
wall mount stand or another stand) and firmly fix the stand by fastening the screw.
•
If you use a screw that is longer than the standard specifications, the inside of the product may be damaged.
•
For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ
depending on the corresponding specifications.
•
Do not use screws that are incompatible with the standard VESA specifications and do not assemble them using
excessive force.
This may result in damage to the product or injury due to the product falling.
The company shall not be held liable for any damage or injury.
•
The company shall not be held liable for any damage to the product or injury caused by using a stand that is not
compatible with the specified specifications or due to an installation not performed by an authorized installation
engineer.
•
When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm of space from the
wall.
•
The company shall not be held liable for any problems caused by using a stand that is not compatible with the specified
specifications.
•
Use the wall mount according to the international specifications.
2-3
Installing the Product
Advertisement
Table of Contents
