Samsung SyncMaster 940MG User Manual page 43

DVI-D to DVI-D connector, Detachable, 2.0 m (Option)
Signal connectors
15pin 3-row D-sub connector, 24pin 3-row DVI-D connector
Power Consumption
Less than 55 W
Power Saving
Less than 2 W
Dimensions (WxDxH)/ Weight
466 x 217 x 406 mm / 18.3 x 8.5 x 16.0 inch / 6.2 kg (With Stand)
466 X 66 X 371 mm /18.3 x 2.6 x 14.6 inch (Without Stand)
VESA Mounting Interface
100 mm X 100 mm (for use with Specialty(Arm) Mounting hardware.)
Environmental considerations
Operating
Storage
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor
installation will proceed automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm(one
millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be
bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it
without uneasiness.
For example, the number of TFT LCD sub pixels contained in this product are 3,888,000.
Note: Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in
all areas including common residential areas.
(Class B equipment emits less electromagnetic waves than Class A equipment.)
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy by
switching your monitor into a low-power mode when it has not been used for a certain amount of time. The
monitor automatically returns to normal operation when you press a key on the keyboard. For energy
conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The
PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use the
software utility installed on your computer to set up this feature.
State
Power Indicator
Power Consumption
Temperature: 50°F to 104°F(10°C to 40°C)
Humidity: 10% to 80%, Non-condensing
Temperature: -4 °F ~113 °F(-20 °C ~ 45 °C)
Humidity: 5% to 95%, Non-condensing
Normal Operation
Green
Analog/Digital
Less than 55 W
Power saving mode
Green, Blinking
Analog/Digital
Less than 2 W
(Off-mode)
Power off
Black
Less than 2 W
(110Vac)