Boost - Mooer PREAMP LIVE Owner's Manual

BOOST

PREAMP LIVE is fully equipped with 2 different boosters. A PRE BOOST and a POST BOOST.
You can make and save independent boost settings for each preamp channel. Here's where
they are in the signal chain.
Boost can be set to PRE or POST by pressing the BOOST control knob.
PRE BOOST comes before the PREAMP in the signal chain and will add more saturation by
pushing the front end of the preamp and boosting the volume, just like a clean overdrive pedal
would. The PRE BOOST also adds a bit of mid hump to your guitar signal to fatten things up.
POST BOOST Comes after the PREAMP in the signal chain so it simply adds more volume when
engaged. The POST BOOST is completely transparent and has a boost range of 0dB - 6dB.
Press the footswitch of your currently selected PREAMP CHANNEL to toggle the boost ON/OFF.


GREEN
FX LOOP
MOOE B
A/B
=OFF
FX LOOP
MOOE A
Serial
FX LOOP
MOOE B
A/B


RED =ON
10