Adjust buttons [
Enter button [ ] /
Power button [ ]
described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed, or
when leaving it unattended for long periods.
The configuration at the back of the monitor may vary from product to product.
DVI IN port
RGB IN port
Adjust items in the menu.
Activates a highlighted menu item. /
Push the 'SOURCE', then selects the video signal while the OSD is
off. (When the SOURCE button is pressed to change the input mode,
a message appears in the upper left of the screen displaying the
current mode -- analog or digital input signal.)
If you select the digital mode, you must connect your monitor to the
graphic card's DVI IN port using the DVI cable.
Use this button for auto adjustment.
>> Click here to see an animation clip
Use this button for turning the monitor on and off.
This light glows blue during normal operation, and blinking blue once
as the monitor saves your adjustments.
Connect the power cord for your monitor to the power port on the back of the
Connect the DVI Cable to the DVI IN port on the back of your monitor.
Connect the signal cable to the 15-pin, D-sub port on the back of your
The Kensington lock is a device used to physically fix the system when using
it in a public place.
The locking device has to be purchased separately.
For using a locking device, contact where you purchase it.
for further information regarding cable connections.