Workign With Raspberry Pi; Rotation - Waveshare 7inch HDMI LCD User Manual

7inch HDMI LCD (B)

WORKIGN WITH RASPBERRY PI

When working with Raspberry Pi, you should set the resolution of the LCD
manually, or else the LCD screen will not work. For more detail information, please
read the following section.
1. Turn on the "backlight" switch
2. Connect the LCD to your Pi
-HDMI Port of LCD -> HDMI Port of Pi;
-USB Port of LCD -> USB Port of Pi;
3. Download the Raspbian image from Raspberry Pi web site.
4. Write the image to a TF card
5. Append the following lines to the config.txt file which is located in the root of
your TF card:
max_usb_current=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0
hdmi_drive=1
6. Save and connect the TF card to your Pi then power up.

ROTATION

Display Rotating
1. To rotating the display, you can append this statement to the config file